Your watercooled X1900 series cards. ( 4 Views )

1. What are you guys hitting? I get ~38-39C idle and up to 47C on load :eek: The old 7800GTX with same setup idled as low as 30C sometimes and max temp I every saw was 38C.
   
   
   (fatmana, Macao)


2. i had mine x1900xt watercooled ,
   
   i was getting 33*@idle and 48*@745/845 1.55v
   
   710/846 @ stock 1.4v was running 37* load
   
   
   (LoRd_ÝLLeGaL, Russian Federation)


3. 31-33c idle, lower 40's load. Load temp doesnt change much when overvolted.
   
   with 1.55 volts, the core got up to 790, then crashed. I think I could run 750 24/7, but i dont. I just use the max catalyst crap allows.
   
   
   (cemal, Indonesia)


4. hmm now with th warmer weather coming around I'm getting 42-44 idle and 55-60 load
   
   keep in mind i have an opteron 165CD @ 2.7ghz 1.4V on the loop too, only using a Black Ice Pro instead of extreme =D
   
   
   (neslihan, Northern Mariana Islands)


5. Quote:

   Originally Posted by Digital Viper-X- hmm now with th warmer weather coming around I'm getting 42-44 idle and 55-60 load keep in mind i have an opteron 165CD @ 2.7ghz 1.4V on the loop too, only using a Black Ice Pro instead of extreme =D

   1 BIP! The 120.1 version? :eek:
   
   I have a BIP120.3. I love it. 3 Silent Yate Loons too. :D
   
   
   (ebrar, Guinea-Bissau)


6. Well ATI cards tend to run hotter than their nVidia counterparts...no getting around that. Still, staying under 50C load is pretty damn good.
   
   
   (berk, Bolivia)


7. x1900XTX @ 750MHz stock voltage loads at 36C.
   
   But I'm not using a normal cooler. I had my waterblock imported from Germany. It's a highly restrictive design from alphacool. It sorta of forces the water into the center of the block (atop the VPU causing turbulance).
   
   My CPU is cooled by a Swiftech Thermo electric Waterblock known as the MCW5002-64T. This ensure's bellow 0 temps on idle and about -5C on load for my processor.
   
   I use two Pumps, an Eheim 1250 120v pump and a Swiftech MCP655 12v pump on high. the Eheim runs 24/7 while the Swiftech only starts up when the system is turned on. This is a fail safe. Incase I'm away from my PC and it shuts off leaving the Meanwell 320W dedicated 12V power supply on heating the ThermoElectric module. At least there's a constant waterflow stopping my system from melting.
   
   I use two radiators as well.. a Black Ice Xtreme II and a Black Ice Xtreme Rev.2. This is about equal to a single Black Ice Xtreme III but without taking up as much place in a single segment of my case.
   
   Because of this setup, my system is completely quiet and I can excellent temps. I may be adding a second x1900 the Crossfire edition and switching the motherboard for an Asus A8R32-MVP... well see.
   
   
   (aydýn, Dominican Republic)


8. So mine looks OK, except when compared to that guy's awesome setup! :eek: I'm running 1.35v on core (.05 below stock) and getting a 50MHz OC to 675. I'm way happy with that for now
   
   In idle I set 300/400 for my clocks, put Vgpu to .875, vmem and vddq to minimum 1.785, and vddci to 1.45 or something.
   
   
   (mehmet, Bolivia)


9. Quote:

   Originally Posted by repoman0 So mine looks OK, except when compared to that guy's awesome setup! :eek: I'm running 1.35v on core (.05 below stock) and getting a 50MHz OC to 675. I'm way happy with that for now In idle I set 300/400 for my clocks, put Vgpu to .875, vmem and vddq to minimum 1.785, and vddci to 1.45 or something.

   nice
   I underclock 2d aswell :)
   
   
   (mutia, Uruguay)


10. Yeah it works really well, who needs all that power and heat in 2D mode :confused: I could run 100/200 and it would probably be fine. But that's a bit rediculous and I don't think volts will go down much more, especially vddci.. seems it needs to be at a certain amount no matter what the clocks or other voltages, or it will freeze when going from 3D-2D and black screen, etc
    
    
    (tuðser, Zimbabwe)


11. Quote:

    Originally Posted by L1ght 1 BIP! The 120.1 version? :eek: I have a BIP120.3. I love it. 3 Silent Yate Loons too. :D

    
    thats right 1 BIP 120.1
    gonna get the GTWO when they come out since im strapped for space
    
    
    (Crayz!!!_wolff_tr, Bolivia)


12. hmmm those clocks are kind of surprising. I am running 749/855 on the stock cooler, at about 3900rpm fan speed. I would have thought that you'd be able to clock way higher on water.
    
    
    (ramazan , Uruguay)


13. Single BIP, using Opty at 3.0 Ghz 1.44v and the X1900XTX stock volts 690/800 - idle is 31 - 32 load is about 37 - 40. Saw 41 load after a few hours of Oblivion the other night though.
    
    
    (Fuat, Oman)

Related Topics ... (or search in 1.720.883 topics !)