Bios wont work right after power outage ( 2 Views )

1. My computer was working great until recently when the power went out due to plugging in a beefy vacuum on the same circuit and the breaker flipped. Since then, whenever I start it up, it had been like stalling on the bios start screen. If I hit the reset button on the front a few times, eventually it will start up like normal. I dont believe this is very good nor the right way it should work ;) Any ideas?
   
   Its an Abit NF7-S2G, Award bios, Sempron 2800+...
   
   Thank you for any help anyone provides.
   
   
   (uður, Kenya)


2. What is your PSU?
   
   
   (berkant, Cyprus)


3. You mean what is my power supply?
   
   
   (yakup, French Guiana)


4. Ya PSU = Power Supply Unit.
   
   
   (emre, Brunei Darussalam)


5. Soly Tech 460w, few months old...
   
   
   (bahtiyar, Netherlands)


6. It might not be the problem....but you might want to try reflashing it again to see if that helps. I'd do it from windows to avoid any startup issues in DOS.
   
   
   (selim, Costa Rica)

Related Topics ... (or search in 1.720.883 topics !)